– Press the press button switch and hold on full bright for 3 seconds

– Release

– Wait 5 seconds

– After the 5 seconds, press the switch 8 times (not too fast – use the count as follows, one thousand, two thousand etc.)

– The light(s) will flash 3 times and go to the minimum setting of the driver circuitry

– If no light comes on wait, the Bikkel will add more current every 2 seconds until the light comes on. – be patient this may take some time depending on the bulb used.

– When the desired minimum setting is reached, press the switch once

– The lights will flash 3 times to let you know it has accepted the new minimum

– The Bikkel will now no longer DIM below this level

SET UP FOR BABY LIGHT:

– Select the brightness you want

– Press the switch twice (2 times).

This will start a 30 minute dim down to off